DRYER SERVICES
- Self Sufficient Unit – no fuel or power required.
- Up to 96% invert recovery.
- 80m3 bin of wet cuttings processed in 12 hours.
- 90% less saw dust costs and usage.
- No stationary footprint.
- Dried cuttings used as drying agent alternative.
- Added protection from inhaling saw dust.

Call For a Quote:
(780)-265-0110
Our Invert Cuttings Dryer is the first of it’s kind being mobile and self powered. The unit is built on a truck allowing us to arrive on site when the cuttings are ready for processing. Being self sufficient eliminates the cost of fuel and power as well as additional day rates and an extra man onsite when there are no cuttings to be managed. Typical flow-line shaker cuttings maintain a liquid content on average between 15% and 20%. When properly managed, Pitbull’s MISCD (Mobile Integrated Shale Cuttings Dryer) can lower the liquid content below 4% and in some cases down to 1%. This can be done while handling an 80 m3 bin of wet drill cuttings in 12 hours.
How does it work?
Drill cuttings are fed into the hopper by our track hoe operator and distributed along the inner wall of the screen with the aid of the flites. The liquid phase, or “filtrate”, passes through the screen openings while the flites scrape the accumulating cake solids towards the bottom of the hopper for disposal. Gravity pulls the filtrate into a containment tank which is then pumped to the drilling rigs’ high speed decanter centrifuge where no further mixing is needed. The waste can then be hauled to disposal or used as drying agent to mix off centrifuge waste, reducing the use of saw dust by 90%. Our MISCD is specifically designed for oil-based drill cuttings management where Operators are concerned about drilling fluid losses and the enviornmental impact of oily cuttings. Pitbull’s MISCD signicantly improves liquid phase recovery, thereby paying for itself many times over.
Designed to balance performance with speed.
Pitbull Energy Services Cuttings Dryer are engineered to deliver continuous, high-quality results during any phase of the operator’s invert drilling section.



Related Services
Vacuum Services
Water Services
Dependable, all weather tandem and tri-axle water trucks
Track Hoe Services
Complete shale cuttings control system